Taizhou Junqian Electric Heating Equipment Co., Ltd. is a professional electric heating electrical appliance manufacturer integrating R & D, production and sales. The company specializes in the production of electric heating pipes, water tank heating pipes, carbon fiber heating pipes, infrared heating pipes, electric heating rings, electric heating plates, electric tropics, electric hot wires, etc. the products are durable, heat conduction efficiency is high and human-friendly design,
Our Certificate
ISO-9001, CQC, CE, Rosh, AAA credit enterprise, AAA quality service credit unit and etc.
Sales Network
Our products are exported all over the world. We are looking forward to receiving your enquiries soon.
3D Printer Cartridge Heater
A 3D printer cartridge heater is a specific type of cartridge heater designed for use in 3D printers. It is a crucial component of the printer's hotend, responsible for heating the nozzle and melting the filament material before extrusion.
Key features and characteristics of 3D printer cartridge heaters include:
Size and Shape: 3D printer cartridge heaters are compact and cylindrical to fit seamlessly into the hotend assembly.
High Temperature: These heaters can reach and maintain temperatures typically between 200°C to 300°C, depending on the material being printed.
Precise Temperature Control: 3D printers require accurate and consistent temperature control for successful printing. Cartridge heaters are equipped with temperature sensors and controllers to achieve precise temperature regulation.
Fast Heating: Cartridge heaters are capable of rapid heat-up times, allowing the printer to quickly reach the desired printing temperature.
High Wattage: They are designed to deliver sufficient power (wattage) to heat the hotend to the required temperature range.
Durability: 3D printer cartridge heaters are constructed with high-quality materials to ensure durability and resistance to wear and tear during prolonged use.
Electrical Connection: They come with lead wires for easy electrical connection to the printer's control board.
|
Resistance heating wire |
NiCr 80/20 wire |
|
Size |
6*20mm or customized |
|
Wire length |
250mm |
|
Wattage Tolerance |
+5%, -10% |
|
Resistance tolerance |
+10%, -5% |
|
Length tolerance |
±1 mm |
|
Diameter tolerance |
-0.02mm |
|
Standard Cold Zone |
5-10mm |
|
Insulation resistance (cold) |
≥ 500 MΩ |
|
Thermocouple Location |
Type J / k / ground wire |
|
Maximum leakage current (cold) |
≤ 0.5 mA |
Power off the 3D printer and gather the necessary tools.
Locate the hotend or heated bed where the cartridge heater is installed.
If replacing an old heater, remove it carefully.
Insert the new cartridge heater and connect its wires to the control board.
Check and connect the thermistor if present.
Reassemble the printer and tighten all screws.
Test the installation by setting the temperature and verifying accuracy.
Perform temperature calibration if needed.
|
Size (Dia*L mm) |
Power (low density W) |
Power (high density W ) |
Size (Dia*L mm) |
Power (low density W) |
Power (high density W) |
|
φ6*60 |
60 |
120 |
φ14*100 |
200 |
450 |
|
φ6*100 |
100 |
200 |
φ14*120 |
250 |
520 |
|
φ6*200 |
190 |
350 |
φ14*150 |
330 |
650 |
|
φ8*50 |
65 |
120 |
φ14*200 |
400 |
880 |
|
φ8*100 |
125 |
250 |
φ14*250 |
550 |
1000 |
|
φ8*150 |
200 |
350 |
φ14*300 |
650 |
1300 |
|
φ8*200 |
250 |
500 |
φ16*100 |
250 |
500 |
|
φ10*60 |
100 |
200 |
φ16*120 |
300 |
600 |
|
φ10*80 |
125 |
250 |
φ16*150 |
350 |
750 |
|
φ10*120 |
200 |
375 |
φ16*200 |
500 |
1000 |
|
φ10*150 |
235 |
475 |
φ16*250 |
600 |
1250 |
|
φ10*200 |
300 |
600 |
φ16*300 |
750 |
1500 |
|
φ10*300 |
470 |
900 |
φ18*100 |
250 |
550 |
|
φ12*60 |
115 |
225 |
φ18*150 |
400 |
850 |
|
φ12*100 |
200 |
375 |
φ18*200 |
550 |
1150 |
|
φ12*120 |
225 |
450 |
φ18*300 |
850 |
1500 |
|
φ12*150 |
280 |
550 |
φ20*100 |
300 |
650 |
|
φ12*200 |
375 |
750 |
φ20*150 |
450 |
950 |
|
φ12*300 |
550 |
1000 |
φ20*300 |
950 |
1800 |
Using compatible and high-quality cartridge heaters in 3D printers is critical to ensure stable and consistent printing outcomes. Our 3D printer heater manufacturer unit produces various heaters based on printer specifications. 3D printing has seen significant rapid growth as it has adapted to technology. It is used widely for advertisement, brand labels, virtual reality scenes, and many other industries. A 3D printer heater is a crucial piece of equipment to ensure printing quality.
We're professional 3D printer cartridge heater manufacturers and suppliers in China, specialized in providing high quality electric heating equipment with competitive price. We warmly welcome you to buy cheap 3D printer cartridge heater from our factory. For quotation, contact us now.
Quartz Heater, 3d Printer Ceramic Heating Element, Flange Electric Heating Tube(0/10)
