(1) Use the side of the light source as the bottom to stand the light source up to expose the trap on the bottom surface. After the halogen bulb is sufficiently cooled, remove the bulb in the direction of the arrow.
(2) Pull out the lamp socket connected to the bulb.
(3) Turn the reflector of the bulb toward the lamp holder, and slide the new bulb along the bulb mounting plate to the inside. Be careful not to touch the plug and the surface of the lamp.
(4) Confirm that the bulb is installed on the slot, and connect the socket to the position reliably.
(5) Install the bulb at the other end in the same way.
